Get the Latest Investment Ideas Delivered Straight to Your Inbox. Subscribe

TICKERS: ROCK

Explorer Reports Blockbuster Copper Intercept
Contributed Opinion

Share on Stocktwits

Source:

Peter Epstein Peter Epstein of Epstein Research homes in on recent high-grade assay results at this company's Saskatchewan project.

Rockridge Resources Ltd. (ROCK:TSX.V) is a fairly new mineral exploration company focused on the acquisition, exploration and development of mineral resource properties in Canada. Its focus is copper and base metals. More specifically, base, green energy and battery metals, of which copper is all three! Not just any place in Canada, world-class mining jurisdictions such as Saskatchewan. And, not just good jurisdictions, but in mining camps with significant past exploration, development or production, in close proximity to key mining infrastructure.

The company's flagship project, Knife Lake, is in Saskatchewan, Canada, (ranked third best mining jurisdiction in the world) in the Fraser Institute Mining Company Survey. The project hosts the Knife Lake deposit, a near-surface, (high-grade copper) VMS copper-cobalt-gold-silver-zinc deposit open along strike and at depth. Management believes there's strong discovery potential in and around the deposit area, and at additional targets on ~85,000 hectares of contiguous claims.

On May 7th, Rockridge reported additional results from its winter diamond drill program at its flagship Knife Lake project in Saskatchewan. Hot on the heels of last week's press release (April 30th) of two holes, comes three more. I was planning on writing an article on those excellent results, but Equity.Guru beat me to the punch, putting out this well done piece. Readers following along may recall that the key takeaway was that holes KF19001 and KF19002 largely confirmed historical grades, intercept widths and geological conditions. Fast forward to May 7th, and management's interpretation of drill holes KF19003, KF19004 and KF19005 was announced. Results on the remaining seven holes will be released over the next 20–30 days. As a reminder, Rockridge has an option agreement with Eagle Plains Resources to acquire a 100% interest in the majority of the Knife Lake Cu-Zn-Ag-Au-Co VMS deposit.

Earlier this year, Rockridge drilled 12 holes for a total of 1,053 meters. Importantly, this represents the first work on the property since 2001. Readers may recall from reading past articles and interviews on Epstein Research and Equity.Guru and viewing videos of CEO Jordan Trimble, that the company's primary goal is to explore districts that have been under-explored, never explored, or not recently explored. Management's highly skilled and experienced technical team and advisors deploy the latest exploration technologies and methods. A lot has changed in 18 years; a simple example would be the use of drones to fly various surveys.

Whatever management is doing seems to be working, as evidenced by two of the first five holes returning very strong results, and the third hole, KF19003 a true blockbuster.

Hole KF19003 was even better than the first two holes. In fact, significantly better, with a grade (Cu Eq.) x thickness (in meters) value of 91, compared to 41 and 49. Make no mistake, KF19001/19002 were great, they averaged 1.21 Cu Eq. over an average 38.5m. But, KF19003, WAS something to write home about…. [if under the age of 30, Google the idiom, "nothing to write home about"]. Near-surface like the first two holes, the 37.6m interval assayed 2% Cu, 0.2 g/t Au, 9.9 g/t Ag, 0.36% Zn and 0.01% Co, for an estimated 2.42% Cu Eq. grade. 2% Cu over 37.6 meters is a tremendous showing at under 41 meters downhole.

Holes KF19004 and KF19005 were mineralized, but had narrower intercept widths of interest. Still, there were attractive Cu Eq. grades (1.25% and 1.20%, respectively). Interestingly, gallium (up to 25.6 ppm) and indium (up to 15.2 ppm) values were found in the mineralized zones of all three holes. Those two rare earth metals trade at an average of about US$300/kg. Each 10 ppm = 1kg/tonne. KF19004 and KF19005 confirmed mineralization up-dip of historically drilled high grade mineralization. So, those two holes were like KF19001 and KF19002, important in building the potential resource size. All activities are advancing the project toward an NI 43-101 compliant mineral resource estimate later this year.

Perhaps best of all, drill hole KF19003 confirmed high-grade mineralization up-dip of KF19002 in an area where no historical drilling is known to have been done. Therefore, this assay, and perhaps nearby assays to follow, will increase the size and grade of the upcoming mineral resource estimate. There were also encouraging zinc values, incl. 4m (from the 37.6m) of 1.32% Zn, nearly C$50/tonne rock. Gold values up to 0.63 g/t are interesting, but like the zinc, I'm referring to only the best grades, from smaller intercepts. That 4m interval I mentioned also had 7.54% Cu. This is clearly a COPPER deposit, Knife Lake is a near-surface, high-grade Cu project. See drill hole results from KF19001 – KF19005 below. Holes KF19001 and KF19002 were released on April 30th, and KF19003-KF19005 on May 7th.

Rockridge's president and CEO, Jordan Trimble commented: "The results from drill hole KF19003, specifically 2.42% Cu Eq. over 37.6m, far exceeded our expectations and represents one of the best holes ever drilled on the project. It is important to note that this drill hole was collared in an area where no historical drilling has been reported. As such these drill results are expected to have a positive impact on the historical resource. Final results from the remaining 7 drill holes are pending and will provide steady news flow over the near term."

Drill indicated intercepts (core length) are reported as drilled widths and true thickness is undetermined. (Details about calculation of Cu Eq. grade can be found in the press release).(Details about calculation of Cu Eq. grade can be found in the press release).

From the press release: "The Knife Lake area saw extensive exploration from the late 1960s to the 1990s with the last documented work program completed in 2001. Between 1996 & 1998, Leader Mining completed 315 diamond drill holes, outlining a broad zone of mineralization occurring at a depth of less than 100 m. Late in 1998, Leader published an historical estimate, reporting a, "drill-indicated" resource of 20.3 M tonnes, grading 0.6% Cu, 0.1 g/t Au, 3 g/t Ag, 0.06% Co & 0.11% Zn. Within the historical estimate there is a higher grade zone containing 11.0 M tonnes of 0.75% Cu, plus other metals."

NOTE: These mineral resource estimates are not supported by a compliant NI 43-101 technical report. A qualified person has not done the work to classify these estimates as current mineral resources in accordance with NI 43-101 standards. Furthermore, the categories used for these historical resource estimates are described as, "drill-indicated". This is not a NI 43-101 resource category, but based on the methodologies & drill hole spacing, management believes it would likely be classified as Inferred.

The project is within the word famous Flin Flon-Snow Lake mining district that contains a prolific VMS base metals belt. Management paid <half a penny/lb of copper and they believe there's tremendous exploration upside. The goal? High-grade discoveries in a mineralized belt that could host multiple deposits, as VMS-style zones often contain clusters of mineralized zones. Of course, the trick is finding them. No modern exploration, drilling or technology has been deployed at Knife Lake. It was discovered 50 years ago and last explored in the 1990s. Airborne geophysics, regional mapping and geochemistry were done. Management believes that modern geophysics—high resolution, deep penetrating EM and drone mag surveys to cover large areas in detail—could make a big difference.

The deposit remains open at depth. Additional discoveries are very possible as the property is >85,000 hectares in size. The winter drill program marks the end of the beginning of this highly prospective project. Importantly, the program gives the company's technical team valuable information about geology, alteration and mineralization that will be applied to regional exploration targets. According to the press release, most of the historical work was shallow drilling in and around the deposit area. Very little regional or district work has been documented. In fact, there wasn't even much drilling done below the deposit. That's why management is optimistic about discovery potential both at depth and regionally. I'm excited to see what the next seven assays add to the Rockridge Resources (TSX-V:ROCK) story!

Peter Epstein is the founder of Epstein Research. His background is in company and financial analysis. He holds an MBA degree in financial analysis from New York University's Stern School of Business.

[NLINSERT]

Disclosures: The content of this article is for information only. Readers fully understand and agree that nothing contained herein, written by Peter Epstein about Rockridge Resources, including but not limited to, commentary, opinions, views, assumptions, reported facts, calculations, etc. is to be considered implicit or explicit investment advice. Nothing contained herein is a recommendation or solicitation to buy or sell any security. [ER] is not responsible under any circumstances for investment actions taken by the reader. [ER] has never been, and is not currently, a registered or licensed financial advisor or broker/dealer, investment advisor, stockbroker, trader, money manager, compliance or legal officer, and does not perform market making activities. [ER] is not directly employed by any company, group, organization, party or person. The shares of Rockridge Resources are highly speculative, not suitable for all investors. Readers understand and agree that investments in small cap stocks can result in a 100% loss of invested funds. It is assumed and agreed upon by readers that they will consult with their own licensed or registered financial advisors before making any investment decisions.

At the time this article was posted, Peter Epstein owned stock in Rockridge Resources and the Company was an advertiser on [ER]. Readers understand and agree that they must conduct their own due diligence above and beyond reading this article. While the author believes he's diligent in screening out companies that, for any reasons whatsoever, are unattractive investment opportunities, he cannot guarantee that his efforts will (or have been) successful. [ER] is not responsible for any perceived, or actual, errors including, but not limited to, commentary, opinions, views, assumptions, reported facts & financial calculations, or for the completeness of this article or future content. [ER] is not expected or required to subsequently follow or cover events & news, or write about any particular company or topic. [ER] is not an expert in any company, industry sector or investment topic.

Streetwise Reports Disclosure:
1) Peter Epstein's disclosures are listed above.
2) The following companies mentioned in the article are billboard sponsors of Streetwise Reports: None. Click here for important disclosures about sponsor fees. The information provided above is for informational purposes only and is not a recommendation to buy or sell any security.
3) Statements and opinions expressed are the opinions of the author and not of Streetwise Reports or its officers. The author is wholly responsible for the validity of the statements. The author was not paid by Streetwise Reports for this article. Streetwise Reports was not paid by the author to publish or syndicate this article. Streetwise Reports requires contributing authors to disclose any shareholdings in, or economic relationships with, companies that they write about. Streetwise Reports relies upon the authors to accurately provide this information and Streetwise Reports has no means of verifying its accuracy.
4) The article does not constitute investment advice. Each reader is encouraged to consult with his or her individual financial professional and any action a reader takes as a result of information presented here is his or her own responsibility. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. This article is not a solicitation for investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company mentioned on Streetwise Reports.
5) From time to time, Streetwise Reports LLC and its directors, officers, employees or members of their families, as well as persons interviewed for articles and interviews on the site, may have a long or short position in securities mentioned. Directors, officers, employees or members of their immediate families are prohibited from making purchases and/or sales of those securities in the open market or otherwise from the time of the interview or the decision to write an article until three business days after the publication of the interview or article. The foregoing prohibition does not apply to articles that in substance only restate previously published company releases.

Graphics provided by the author.





Want to read more about Base Metals investment ideas?
Get Our Streetwise Reports Resources Report Newsletter Free and be the first to know!

A valid email address is required to subscribe